With the 2027 model year, Orbea is updating its most important e-mountain bike platforms and expanding its range in the road bike segment. The focus is on the revamped Wild LT and Rallon RS e-enduro models. The 2027 Orbea Wild LT is powered by the DJI Avinox M2S motor (with an RS-Tune specially developed for Orbea). For buyers, this raises a clear question: which model suits which riding profile, and how do the new drive systems differ from the previous generation?
This guide provides an overview of the new features. You will learn how the Wild LT and Rallon RS differ in terms of travel, motor concept, and battery design, which equipment variants are available, and when the new models will be available in the DACH region.
Model Check: Orbea Wild and Rallon 2027
For 2027, Orbea is more clearly separating its E-MTB range by intended use. On one hand, there is the Wild LT as a full-fledged E-Enduro with high motor power and a large battery. On the other hand, the Rallon RS is positioned as a Light E-MTB with a reduced drive system and significantly lower weight.
If you mainly ride in bike parks, on technical descents, or on long tours with plenty of elevation gain and value maximum support and range, the Wild LT is the right choice. The large battery and full Bosch CX drive system provide the necessary reserves here.
If, on the other hand, you prefer a natural riding feel that comes close to a classic enduro, and are prepared to sacrifice some range for less weight, then the Rallon RS is the way to go. The light concept with a smaller battery is aimed at riders who also want to experience the bike as playful and agile.
| Feature | Wild LT 2027 | Rallon RS 2027 |
|---|---|---|
| Category | E-Enduro (Full-Power) | Light E-MTB Enduro |
| Travel | 170 mm | approx. 170 mm |
| Motor | Bosch Performance Line CX Gen 5 | Bosch Performance Line SX |
| Battery options | 600 Wh / 400 Wh | 400 Wh |
| Riding profile | Range, high support, bike park | Agile handling, low weight |
Orbea Wild LT 2027: The new E-Enduro flagship
The Wild LT forms the top of Orbea's E-Enduro program. With 170 mm of travel at the front and rear and a 63.5-degree head angle, the geometry is designed for steep, rough terrain. The slack head angle ensures stability at high speeds, while the frame design accommodates the fifth-generation Bosch CX along with a large battery. The 2027 Orbea Wild LT offers a choice between a 600 Wh battery and a larger 800 Wh battery.
For 2027, Orbea is offering the Wild LT in five equipment variants. They cover a wide price range and differ primarily in suspension, drivetrain, and brakes. The following overview shows the typical hierarchy of the variants.
| Variant | Suspension | Drivetrain | Brakes | Price range |
|---|---|---|---|---|
| M-LTD | Fox Factory (Kashima) | Shimano XTR / SRAM XX | 4-piston high-end | Top model |
| M-Team | Fox Factory | Shimano XT | 4-piston | Upper segment |
| M10 | Fox Performance Elite | Shimano XT / SLX mix | 4-piston | Mid-range plus |
| M20 | Fox Performance / RockShox | Shimano SLX | 4-piston | Entry-level |
| M-LTD TR | Fox Factory (Trail-Tuning) | Shimano XTR | 4-piston | Special variant |
In terms of price, the range extends from the entry-level M20 to the fully equipped M-LTD. The M20 is interesting for everyone looking for a reliable drive and solid suspension without paying the premium for detailed weight and wear optimizations. The M-Team strikes a practical balance between equipment and price, as it combines Fox Factory suspension with the durable Shimano XT group. The M-LTD is particularly worthwhile for high-mileage riders who want every component at the highest level.
One point that sets Orbea apart from many competitors is the MyO configuration program. It allows you to customize the Wild LT individually before purchase. For 2027, this applies not only to the frame color but also to individual components such as suspension elements, wheels, or the seat post. This way, you can tune a bike to your body weight and riding style instead of just choosing between fixed complete packages. Those using the MyO options should plan for longer delivery times, as the bike is built after the order is placed.
Orbea Rallon RS 2027: The evolution of the Light E-MTB
The Rallon RS stands for Orbea's light-support approach. Instead of maximum motor power and a large battery, this model relies on low system weight. The 2027 Rallon RS is equipped with the compact TQ HPR40 motor (40 Nm), which provides less torque than the CX due to its lower weight and more compact design, but enables a riding feel that is very close to an unpowered enduro.
The 2027 Orbea Rallon RS features a 290 Wh battery, not a 400 Wh one. This noticeably reduces the mass and keeps the center of gravity low. In combination with the RS-tuning of the frame and lighter components, the top model achieves a weight of under 19 kilograms. For an enduro with around 170 mm of travel and electric support, this is a low value and clearly positions the Rallon RS in the light-enduro class.
Compared to competitors in this segment, Orbea plays its strength in the overall package. Many competing models with a similar drive concept, such as the Specialized Turbo Kenevo SL (approx. 19.3 kg) or the Trek Fuel EXe (approx. 19 kg), are in the same weight range, but the Rallon RS sometimes undercuts these at under 19 kg and also differs in frame layout and range. The Rallon RS is aimed at riders who want to ride trails more actively and dynamically rather than relying on long distances with lots of elevation gain. Anyone planning very long tours regularly is better served with the Wild LT and its larger battery.
Practically speaking: If the support of the SX motor is sufficient for your local rides and you value the bike feeling light and agile, the Rallon RS is the right choice. If, on the other hand, you need every extra watt-hour for extended rides, the recommendation shifts to the full-power model.
Technological innovations: Motors and batteries
The most important technical component of the 2027 generation is the Bosch Performance Line CX in its fifth development stage. It replaces the previous Gen 4 drive in the Wild LT and brings changes that are noticeable in everyday use. Orbea integrates the motor deeper into the frame and encapsulates it more effectively, which reduces noise development. The responsiveness has been refined so that the support kicks in more naturally and fewer noticeable jumps occur when switching between pedal power and motor power.
The following comparison summarizes the essential differences between the two motor generations in the Orbea frame.
| Feature | Bosch CX Gen 4 | Bosch CX Gen 5 |
|---|---|---|
| Noise level | audible under load | reduced by stronger encapsulation |
| Responsiveness | direct, but less finely adjustable | smoother power delivery |
| Frame integration | more visible design | embedded deeper and more compactly |
| Battery connectivity | established system | optimized connection and data exchange |
In addition to hardware, software is playing an increasing role. You can adjust the support levels via the Bosch app, allowing you to tune the power characteristics of the motor to your preferences. Orbea Rider Connect is an online platform for checking inventory and reserving bikes at local dealers. The networking on the bike itself (e.g., dropper post and suspension) runs via the new 'RS ecosystem,' while motor settings are made via the respective drive manufacturer's app (such as DJI). The improved connectivity allows for deep insights into Orbea's proprietary battery management: the system performs cell-specific temperature monitoring and dynamic voltage adjustment to prevent overheating. Furthermore, the app offers advanced software-tuning options that allow riders to individually adjust the acceleration curve, the maximum torque per support level, and the motor overrun for technical trail sections.
The Rallon RS uses the lighter SX motor instead of the CX. It shares the same digital ecosystem but is designed for lower weight and a more compact structure. In this way, Orbea is covering two different needs in 2027 with a common software basis: full power in the Wild LT and reduced weight in the Rallon RS.
When will the new 2027 Orbea models hit the market?
Orbea traditionally introduces new model years in the second half of the year. The general timeframe for the 2027 generation is based on this pattern:
- Official introduction of the new E-MTB platforms: usually in late summer to early autumn.
- Start of sales for the first variants: shortly after the introduction, often with the top models first.
- Broad availability across all equipment lines: staggered over the following months.
- Road bike models such as the Orca Aero are sometimes communicated at their own specific time.
In the DACH region, the actual availability depends heavily on the specialist retailer and the selected MyO options. Standard configurations are generally available faster, while individually assembled bikes have a longer waiting time. Anyone wanting a specific model or color should speak to their dealer early, as popular variants can sell out quickly.
Frequently asked questions about the new 2027 Orbea features
Will the 2027 Orbea Wild be equipped with the DJI Avinox motor?
Orbea relies on its established cooperation with Bosch for the 2027 Wild, using the fifth-generation Performance Line CX. The 2027 Orbea Wild LT is the flagship model for the cooperation with DJI and is officially equipped with the DJI Avinox M2S motor, which excels with the new motor generation in terms of noise and responsiveness.
What changes in the 2027 Orbea Oiz compared to its predecessor?
The Oiz 2027 receives moderate adjustments rather than a complete redesign. These include updated geometry, optimized cable routing, and further refined frame weight. This is complemented by new color options. The focus remains clearly on efficiency in cross-country use.
Is there a new 2027 Orbea Orca Aero road bike?
Yes, an updated version of the Orca Aero is expected for 2027. The focus is on an optimized aero profile, higher stiffness, and new cockpit solutions with better integration of cables and components. This model is aimed at riders who value speed and efficiency on the road.
How can I secure a model early despite long delivery times?
The most reliable way to secure a model is via a pre-order with a specialist dealer. Make contact early, before the popular variants are spoken for, and clarify whether a deposit is possible for a reservation. In addition, the Orbea Rider Connect portal helps you keep an eye on availability and track the ordering process.
What are the most important technological innovations for Orbea e-bikes in 2027?
The core focus is the integration of the Bosch CX Gen 5 into the new frames. The stronger encapsulation of the motor reduces noise, and responsiveness has been revised for smoother power delivery. This is complemented by lighter battery concepts and AI-supported energy management that can be fine-tuned via the app. In the Rallon RS, the lighter SX motor expands the offering in the light E-MTB segment.
